Call a Specialist Today! 833-335-0427

Eaton 9315 UPS 625 to 750 kVA Technical Specs
Uninterruptible Power Supply

Model Selection Guide

Input
Voltage Range +10% to -15%
Frequency Range +/-5%
Surge Protection Meets ANSI C62.41, Category A & B, EN 50091-2 and EN 50082-2
Power Factor 0.95 Typical at full load with input filter
Output
Voltage Regulation Better than +/- 1%
Voltage THD Less than 5% (100% nonlinear load); Less than 3% (100% linear load)
Transient Response Less than 5% for 100% load, step full recovery within 1 cycle
Frequency Regulation (Free Run) +/- 0.005 Hz
Frequency Sync Range +/- 0.5 Hz
Frequency Slew Rate 1 Hz/sec.
Load Crest Ratio 3:1
Safety (pending)
UL 1778 Listed
CUL CAN/CSA C22.2NO.107.1-M91 Listed EN 50091-1
All Cabinets provide seismic mounting features, selectable DC ground fault detection capability
Environmental
Audible Noise 75 dBA at 1 meter
Ambient Operating Temperature 0°C to 40°C
Ambient Storage Temperature -20°C to 70°C
Altitude 5000 ft. (1500 m) at 40°C without derating
Relative Humidity 5-95% non-condensing
EMC Meet FCC Class A, EN 50091-2 (CISPR 22, Class A, Restricted Access)
Electrostatic Discharge Withstands 25kV without damage or disturbance to load

Go to top

Model Selection Guide:

   9315-750  9315-750/625
  750 kVA/600 kW   625 kVA/500 kW
Input Voltage volts 480 600 480 600
Output Voltage volts 480 600 480 600
Input Voltage Range 
 Minimum volts 408 510 408 510
 Maximum volts 528 660 528 600
Input/Output Frequency Hz 60 60 60 60
AC Input (with input filter)
 Nominal Amps amps 913 730 761 609
 Maximum Amps amps 1141 913 951 761
Bypass Input  
 Nominal Amps amps 902 722 752 601
AC Input (without input filter)
 Nominal Amps amps 902 722 752 601
 10 minutes max amps 1128 902 940 752
DC Link 
 Nominal DC Voltage volts 384 384 384 384
Float Voltage volts 432 432 432 432
End of Discharge volts 320 320 320 320
Nominal Amps amps 1954 9554 1628 1628
Physical Attributes (w/o batt.) 
Single Module RT Configurations 
 Installed Weight lbs 13,200 13,200 13,200 13,200
 Installed Width inches 149" 149" 149" 149"
 Multimodule Configurations 
 Installed Weight lbs 12,600 12,600 12,600 12,600
 Installed Width inches 126 5/8" 126 5/8" 126 5/8" 126 5/8"
System Efficiencies 
 100% Load  %  94  94  94  94
 75% Load   %  94  94  94  94
 50% Load   %  93  93  93  93
Full Load Heat Dissipation 
 BTU/Hr. (x1000) 130.8 130.8  109.0 109.0
 KCal/Hr. (x1000) 33.0 33.0 27.5 27.5
Inverter Efficiency (Full Load)
% 95 95 95 95

Go to top