Call a Specialist Today! 833-335-0427

Eaton 5P 1500R Tower UPS Technical Specifications
Enterprise class battery backup for network closets and small data centers


5P550R
1440 VA / 1100W, 120V

Eaton 5P 1500R Tower UPS Technical Specifications
General
Topology Line-interactive
Configuration Rackmount/Wallmount
Color Black and silver
Rating (VA/Watts) 1440/1100
Diagnostics Full system self-test at power up
Efficiency up to 97%
Dimensions (H x W x D, inches) 1.7 (1U) x 17.2 x 21.8
Dimensions (H x W x D, mm) 43.2 x 438 x 554
Weight (kg) 20.0
Weight (lbs) 44.1
Warranty 3 years on electronics, 3 years on batteries with registration
Rail Kit Included 4-post rail kit
Remote Emergency Power off (REPO) ROO/RPO: Rear terminal block connector for remote on/off and power off
Contents
(Ships with the following items)
5P UPS
User manual CD
Intelligent Power Software Suite CD
Quick start guide
USB cable
RS-232 serial cable
4-post rail kit ears
Electrical Input
Connection NEMA 5-15P
5-15p
Input Cord 6 feet (1.8 meters)
Input Voltage Range 89–151 Vac (adjustable to 70–153 Vac)
Nominal Voltage 120 Vac (adjustable to 100/120/125Vac)
Frequency 50/60 Hz (auto-sensing)
Frequency Range 47–70 Hz (50 Hz system), 56.5–70 Hz (60 Hz system), 40-70 Hz in low-sensitivity mode
Electrical Output
Nominal Voltage 120V default (100/120/125V)
Output Receptacles (5) NEMA 5-15R
5-15
On Utility Voltage Regulation 102–132 Vac
On Battery Voltage Regulation -10%, +6% of nominal
Output Frequency 50/60 Hz ±0.1 % (autosensing)
Load Segments Group 1: (2) 5-15R outlets; Group 2: (1) 5-15R outlet
Battery

Runtime
(minutes)
Load (watts)
Mouseover graph for detailed runtime values
Battery runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc.
Battery Description Sealed, lead-acid; maintenance free
Battery Management ABM technology; 3-stage charging extends battery service life by 50% and provides advance warning for battery replacement
Battery Type Sealed, lead-acid; maintenance free
Battery Replacement Hot-swappable internal batteries
Extended Battery Capability None
Start On Battery Allows start of UPS without utility power (First time start must be on AC power)
Communications
User Interface LCD graphical display
LEDs Load protected, on battery and fault
Communication Ports RS-232 (RJ45) ports; USB port as standard (HID). 6-foot RS-232 and USB cables included
Communications Card Slots One slot; Network Card-MS is optional
Power Management Software Eaton Intelligent Power Software Suite CD (included)
Environmental & Standards
RoHS Compliance Yes
Heat Dissipation (BTU) Line: 113, Battery: 714
Audible Noise <45 dBA at 1 meter
Operating Temperature 0 to 40°C (32°F to 104°F)
Performance - Safety - EMC UL 1778, UL497A
Safety markings cULus, CE
EMC Markings IEC 62040-2 C1-C2 / EN 55024 / CISPR22 Class B / FCC part 15 Class B
Storage Temperature -15°C – 40°C (5°F – 104°F)
Relative Humidity 0–90% non-condensing
Altitude Up to 10,000 ft (3000m) without de-rating